O & S Turntables

All turntable items are available retail direct only. 
Sorry, no dealer discount.
Sorry no foreign sales.

A Bowser turntable is made of 1/2" plywood with a brass pit wall, the wood is painted gray; the pit rail is installed and the wiring done. The center shaft , bearings and bogies are installed on the wooden bridge beam. Track and is NOT included. The bridge will accept any type of track you like. A turntable requires a square hole 2" larger than the bridge length and at least 6" of clearance under the layout. The motor requires and N or HO transformer (only controls the rotation of bridge) to move the bridge clockwise or counterclockwise. When the bridge is stopped it is locked in place. You can move the bridge very slowly. This allows you to align the track for the loco to pull onto the bridge. An automatic indexing system (stop at the next track automatically) is made by Dallee Electronic. The Dallee unit stops the bridge at each track without you having to align it. The Dallee Indexer is mounted under the layout and can be installed after the turntable is in your layout without having to tear it apart .

Now Includes a 2 motor drive system.

Length of Bridge	Description Dallee indexing unit is not included in this price.
7924	24" Long Bridge, pit, bridge details and motor	$521.05
7932	32" Long Bridge, pit, bridge details and motor	$546.35

Prices include turntable, girder kit, bridge deck kit & motorizing kit.  Dallee indexing unit is not included in this price.

Shipping and Handling for Complete Turntable Packages   -  $38.00

---

Instruction Page - Click Here (8 meg pdf)

---

#213-617  Dallee Electronics Indexing Kit  -  $74.95
Will stop the turntable at any location you set. Mounts under the turntable and has an infinite number of stops.
The following is a link to Dallee Indexer Instruction Page 
http://www.dallee.com/Turntable.htm

   
O & O-27 Gauge Bridge Deck Kit
Available separately if you already have a Bowser turntable.
This is include with a new turntable.

Part  Number	Description
#7902	Bridge Deck Kit for O Gauge Track      $88.55
#7903	Bridge Deck Kit for O-27 Track            $88.55

Dress up your turntable bridge with railings, rail stanchions, shanty, drive motor & bracket, and electrical gantry. Kit encludes wood to make long ties, wood for the deck, pewter wire tower,  and shanty. Customer must cut wood to length and glue in place, drill holes for stanchions & glue in place, glue together shanty, screw together wire tower and paint parts.
Chick here for photos of the parts in these kits

Bogie and drive wheel clamp upgrade for your old Bowser turntables

#79218 Drive wheel Clamp

#79237  O BOGIE ASSY W/.700 WHEEL (WOOD TIES) #79239  O BOGIE ASSY .800 WHEEL (PLASTIC TIES) 2 pieces need per turntable

Repair and new versions of parts. 79215    Bridge Bushing - holds shaft to wood bridge beam 932043  6-32 X 1/4 SOCKET HEAD CAP SCREW 79214    Pit Bushing - shaft passes through this bushing in the                       bottom of the pit. 79134    HO Shaft - 5/16 diameter steel 79234    O Shaft - 5/16 diameter steel 79477    HO Bridge Bogie - wheel assembly that is mounted on                             each end of wood beam 79237  O Bridge  BOGIE W/.700 WHEEL (WOOD TIES) 79239  O Bridge BOGIE .800 WHEEL (PLASTIC TIES) 79218    Drive wheel clamp - holds drive wheel to the shaft 79330    Set collar - slides on shaft between bridge and pit                                        bushing 932043  6-32 X 1/4 SOCKET HEAD CAP SCREW

Sorry we cannot supply Korber Roundhouses